Shopping Cart

Support

  • 0983029530

  • Mr, Linh Tran Mr, Linh Tran

    Mr, Linh Tran
    +84983029530

Counter

Online : 2

Today's view : 43

Yesterday view : 113

Visited : 257062

CCS_SHB45A

6 Month

Feature:

  • 1 Channels
  • Input Power Supply 10-55VDC
  • Continuous Current 45A, 100A Max/Channel.
  • Power Max 2000W/Channel.
  • Bi-direction, Velocity A Brush Motor.
  • Support Accer, Decelerater. 
  • Soft Limit Left & Right.
  • Two Buttons Quit Test & Reset.
  • Communicate Methode: PWM/Dir, PWM Bi-direction, Analog/Dir, Analog Bi-Direction, Uart, PPM signal.
  • Protection:  Under voltage, Over voltage, Over temperature, Over Current, Voltage Clamp.
  • No polarity protection for V motor.

Introduction:

  • The driver is H-Bridge Driver which is designed to control 2 brusheds DC motor about the Velocity, Direction... The Motor is controlled by MOSFETs with 16 Khz switching to optimum performance and noise.

  • The driver is a Smart H-Bridge Driver with 2 channels which supports the Acceleration/Deceleration feature. This feature will help protect the Electric, Mechanical…It will useful for many applications.

  • Voltage Clamp Feature: The motor will as a generator and make unexpect voltage increase, This energy will burn the power supply if they increase so high. The Voltage Clamp Feature will discharge that energy via a external resistor to protect the power supply. 

  • The driver also supports two Electric Current Home Sensors inside to limit the moving left and right. The user doesn’t need to add more extended limit switches. This driver will monitor the current when the Motor running, if the current of the Motor same as with the iLimit (iLimit is a current limit setting by a potentiometer in PCB), the driver will set a Touched Flag and stop moving in that direction. To move, the driver needs control by reverse direction or the Touched Flag need to be clear.

  • The driver supports many protection methods such as Under voltage, Over voltage, Over temperature, Over Current. These protecting features are very important witch help to keep the protection system.

 

Application:

  • DC/DC Servo Control.
  • Automation, robot, CNC.
  • Mechanical, Car...

Rc control 2 drivers in mixed mode:

Rc control 1 drivers in independent mode:

Potentiometer control driver in Analog Mode:

Voltage Clamp Feature:

 

Documentation:

https://www.dropbox.com/s/ey0fj6bgil0c6xv/User%20manual%20CCS_SHB45_60A_V1.0.pdf?dl=0

Connection:

 

Mechanical Specification (unit: mm)

 

RC in mixed mode:

Potentiometer Mode:

 

Num Title Download File size Date

Other Products

CCS_2xSHB50A Two Channels, Multi Mode

Overview | Manual | Distributor

Contact

Detail Add to cart

Working Voltage: 8-30VDC

Continuous Current: 50A/Ch

Power Max: 1400W/Ch

Quantity: 19

CCS_2xSHB35A Two Channels, Multi Mode

Overview | Manual | Distributor

Contact

Detail Add to cart

Working Voltage: 8-40VDC

Continuous Current / Channel: 35A

Power Max / Channel: 1200W

Quantity: 76

CCS_SHB20_RC Combo RC with Smart HBridge

Overview | Manual | Distributor

Contact

Detail Add to cart

Working Voltage: 8-40VDC

Continuous Current / Driver: 20A

Power Max / Driver: 800W

Quantity: 99

CCS_SHB12_RC Combo RC with Smart HBridge

Overview | Manual | Distributor

Contact

Detail Add to cart

Working Voltage: 8-40VDC

Continuous Current / Driver: 12A

Power Max / Driver: 300W

Quantity: 99

CCS_SHB12 Multi Mode, Multi Protection

Overview | Manual | Distribuitor

Contact

Detail Add to cart

Working Voltage: 8-40VDC

Continuous Current: 12A

Power Max: 300W

Quantity: 298

CCS_SHB20 Multi Mode, Multi Protection

Overview | Manual | Distributor

Contact

Detail Add to cart

Working Voltage: 8-40VDC

Continuous Current: 20A

Power Max: 800W

Quantity: 295